A novel surgical treatment approach for the vertical root fracture of posterior teeth: a case report with 24-month review.

BACKGROUND: Up to 25% of the tooth extraction after root canal treatment could be attributed to the vertical root fracture (VRF). The treatment choice for teeth with VRF would mostly be the extraction despite some repairing methods were also reported. The repairing treatment result of VRF would mostly depend on the fixation strength and the bioactivity of the repairing materials, especially for the posterior teeth with high masticating stresses. This case report designed a novel surgical treatment approach for the VRF of posterior teeth. METHODS: a maxillary premolar with buccal-palatal complete VRF was treated with a new dual-layered repairing approach using adhesive resin + iRoot BP Plus bioceramic cement to fill the modified fracture line with retention forms through the intentional replantation. RESULTS: At the 24-month review, the tooth showed desirable periodontal healing and normal function. CONCLUSIONS: This case report indicated that the dual-layered repairing approach might be effective for saving the posterior teeth with VRF. Nevertheless, further clinical trials are needed for its long-term result.

Clinical challenges of biomechanical performance of narrow-diameter implants in maxillary posterior teeth in aging patients: A finite element analysis.

This study evaluated the biomechanical performance of narrow-diameter implant (NDI) treatment in atrophic maxillary posterior teeth in aging patients by finite element analysis. The upper left posterior bone segment with first and second premolar teeth missing obtained from a patient's cone beam computed tomography data was simulated with cortical bone thicknesses of 0.5 and 1.0 mm. Three model groups were analyzed. The Regimen group had NDIs of 3.3 × 10 mm in length with non-splinted crowns. Experimental-1 group had NDIs of 3.0 × 10 mm in length with non-splinted crowns and Experimental-2 group had NDIs of 3.0 × 10 mm in length with splinted crowns. The applied load was 56.9 N in three directions: axial (along the implant axis), oblique at 30° (30° to the bucco-palatal plane compared to the vertical axis of the tooth), and lateral load at 90° (90° in the bucco-palatal plane compared to the vertical axis of the tooth). The results of the von Mises stress on the implant fixture, the elastic strain, and principal value of stress on the crestal marginal bone were analyzed. The axial load direction was comparable in the von Mises stress values in all groups, which indicated it was not necessary to use splinted crowns. The elastic strain values in the axial and oblique directions were within the limits of Frost's mechanostat theory. The principal value of stress in all groups were under the threshold of the compressive stress and tensile strength of cortical bone. In the oblique and lateral directions, the splinted crown showed better results for both the von Mises stress, elastic strain, and principal value of stress than the non-splinted crown. In conclusion, category 2 NDIs can be used in the upper premolar region of aging patients in the case of insufficient bone for category 3 NDI restorations.

The effect of micro-osteoperforations on the rate of maxillary incisors' retraction in orthodontic space closure: a randomized controlled clinical trial.

BACKGROUND: This single-centered randomized controlled clinical trial aimed to evaluate the effectiveness of micro-osteoperforations (MOPs) in accelerating the orthodontic retraction of maxillary incisors. METHODS: Forty-two patients aged 16-40 were recruited and randomly assigned into two groups, one which underwent MOPs (MOPG) in the buccal and palatal region of all maxillary incisors immediately before the start of retraction and one which did not (CG). Eligibility criteria included the orthodontic need for maxillary first premolars extraction and space closure in two phases. The primary outcome of the study consisted of measuring the rate of space closure and, consequently, the rate of incisors' retraction using digital model superimposition 14 days later and monthly thereafter for the next 4 months. The secondary outcomes included measuring anchorage loss, central incisors' inclination, and root length shortening, analyzed using cone beam computed tomography scans acquired before retraction and 4 months after retraction. Randomization was performed using QuickCalcs software. While clinical blinding was not possible, the image's examinator was blinded. RESULTS: Twenty-one patients were randomly assigned to each group. However, due to various reasons, a total of 37 patients (17 male and 20 female) were analyzed (mean age: 24.3 ± 8.1 years in the MOPG; 22.2 ± 4.2 years in the CG) during the trial. No statistically significant difference was found between the MOPG and the CG regarding the incisors' retraction measured at different time points at the incisal border (14 days, 0.4 mm vs. 0.5 mm; 1 month, 0.79 mm vs. 0.77 mm; 2 months, 1.47 mm vs. 1.41 mm; 3 months, 2.09 mm vs. 1.88 mm; 4 months, 2.62 mm vs. 2.29 mm) and at the cervical level (14 days, 0.28 mm vs. 0.30 mm; 1 month, 0.41 mm vs. 0.32 mm; 2 months, 0.89 mm vs. 0.61 mm; 3 months, 1.36 mm vs. 1.10 mm; 4 months, 1.73 mm vs. 1.39 mm). Similarly, no statistically significant differences were detected in the space closure, anchorage loss, central incisors' inclination, and radicular length between groups. No adverse effect was observed during the trial. CONCLUSIONS: MOPs did not accelerate the retraction of the maxillary incisors, nor were they associated with greater incisor inclination or root resorption. Trial registration ClinicalTrials.gov NCT03089996. Registered 24 March 2017- https://clinicaltrials.gov/ct2/show/NCT03089996 .

[Four-year follow-up study of onlay and occlusal veneer restorations on posterior teeth].

OBJECTIVE: To investigate the survival rate and clinical failure reasons of onlay and occlusal veneer restorations retrospectively, and to put forward valuable suggestions for the selection of clinical indications. METHODS: A total of 102 patients and 124 teeth treated by one of the authors from 2016 to 2019 were subjected to CAD/CAM lithium silicate reinforced glass-ceramic onlay or veneer restorations of premolars and molars, including 43 teeth with pulp vitality, 81 endodontic treated teeth, and occlusal thickness of restoration was 1.5 mm. After four years of restoration, retrospective surveys were conducted to record the survival rate of restorations, the causes of restoration failure, and patient satisfaction rates, and the survival rate of restorations between vital teeth and endodontic treated teeth and among restored teeth was statistically analyzed by Chi-square test. RESULTS: The survival rates of restorations on vital teeth and endodontic treated teeth were 95.5% and 90.0%, respectively, the average survival rate was 90.2%. The survival rates of vital teeth were higher than those of endodontic treated teeth without statistical difference. There was also no statistically significant difference among the tooth locations. The causes of failure included the cracking of the restoration, the loss of the restoration, the fracture of the abutment teeth, secondary caries below the adjacent contact point, and food impaction caused by the loosening of the adjacent contact point. The overall patient satisfaction rate was 91.5%. CONCLUSION: The 4-year survival rate of glass-ceramic onlays and occlusal veneers is lower than that of the full crown restoration, and there are more complications than that of the single-crown restorations. The design of the restoration should be carefully selected based on the vitality of the abutment tooth and the remaining amount of tooth tissue. When there is too little tooth structure left, a post and crown should be selected for restoration. Adequate strength and thickness of the restoration should be ensured to prevent food impaction. Due to the small amount of abutment tooth preparation, it has the advantages of less stimulation of the pulp and periodontal tissue, and can be recommended as a trial restoration.

Robot-Assisted and Haptic-Guided Endodontic Surgery: A Case Report.

There has been a significant increase in robot-assisted dental procedures in the past decade, particularly in the area of robot-assisted implant placement. The objective of this case report was to assess the initial use of the Yomi Robot's assistance and haptic guidance during endodontic microsurgery. The robot was used during the osteotomy and root-end resection of the first and second upper left premolars. The report aims to inform clinicians of the initial implementation of this cutting-edge technology in endodontics and its potential to enhance endodontic microsurgery. The Yomi Robot was used in performing osteotomy and root-end resection during apical surgery in a patient presenting with symptomatic upper left first and second premolars. The treatment procedure was decided after clinical examination, chart data, and radiographic examinations, which showed periapical lesions on both premolars, taking into consideration the failed endodontic retreatment on the first premolar, the post and ceramic coronal restorations on both teeth, and the desire of the patient to save them. The Yomi Robot system provides auditory, visual, and physical guidance to clinicians during surgery while using a cone-beam computed tomography scan for precision planning with greater accuracy and minimized potential for human error. Further studies are needed to prepare a protocol for robotic-guided procedures in endodontics.

Extraction vs nonextraction orthodontic treatment: a systematic review and meta-analysis.

OBJECTIVES: To compare four first premolar extraction and nonextraction treatment effects on intra-arch width, profile, treatment duration, occlusal outcomes, smile aesthetics and stability. MATERIALS AND METHODS: An electronic search of the literature to June 2, 2023 was conducted using health science databases, with additional search of gray literature, unpublished material, and hand searching, for studies reporting nonsurgical patients with fixed appliances regarding sixteen sub-outcomes. Data extraction used customized forms, quality assessed with ROBINS-I (Risk Of Bias In Non-randomized Studies-of Interventions) and Cochrane RoB 2 (risk-of-bias) tool. GRADE (Grading of Recommendations Assessment, Development and Evaluation) assessed certainty of evidence. RESULTS: Thirty (29 retrospective studies, 1 randomized controlled trial) studies were included. Random-effect meta-analysis (95% CI) demonstrated maxillary (MD: -2.03 mm; [-2.97, -1.09]; P < .0001) and mandibular inter-first molar width decrease (MD: -2.00 mm; [-2.71, -1.30]; P < .00001) with four first premolar extraction; mandibular intercanine width increase (MD: 0.68 mm; [0.36, 0.99]; P < .0001) and shorter treatment duration (MD: 0.36 years; [0.10, 0.62]; P = .007) in the nonextraction group. Narrative synthesis included three and five studies for upper and lower lip-E plane, respectively. For American Board of Orthodontics Objective Grading System and maxillary/mandibular anterior alignment (Little's irregularity index), each included two studies with inconclusive evidence. There were no eligible studies for UK Peer Assessment Rating (PAR) score. Class I subgroup/sensitivity analyses favored the same results. Prediction interval indicated no significant difference for all outcomes. CONCLUSIONS: Four first premolar extraction results in maxillary and mandibular inter-first molar width decrease and retraction of upper/lower lips. Nonextraction treatment results in mandibular intercanine width increase and shorter treatment duration. There was no significant difference between the two groups regarding maxillary intercanine width, US PAR score, and posttreatment smile esthetics. Further high-quality focused research is recommended.

Treatment of Class II malocclusion with 2-maxillary premolar extractions: Monthly vs biweekly appointments, which is more efficient?

INTRODUCTION: This study compared whether there is a difference in treatment time (TT) and efficiency when appointments are held once a month or at 2-week intervals in patients with Class II malocclusion treated with 2-premolar extractions METHODS: The patients of this retrospective sample were treated with the same orthodontic mechanics and divided into 2 groups according to frequencies of orthodontic appointments. Group 1 consisted of 18 patients (10 males, 8 females), with an initial mean age of 14.38 ± 1.38 years and appointments once a month. Group 2 consisted of 19 patients (9 males, 10 females), with an initial mean age of 14.12 ± 1.38 years and biweekly appointments. Edgewise fixed appliances with a slot size of 0.022 × 0.028 mm were used, and the anterior teeth were retracted en-masse with a rectangular wire and elastic chains. The Peer Assessment Rating and Objective Grading System indexes were measured in the dental models at the beginning and the end of treatment. Efficiency was assessed by dividing the percentage of improvement of each occlusal index concerning the multiplication of TT and the number of appointments. RESULTS: Both groups presented similar Peer Assessment Rating and Objective Grading System indexes at the end of treatment. Groups 1 and 2 presented different TTs (28.06 and 22.05 months, respectively); however, there were no differences regarding the efficiency of both protocols. CONCLUSIONS: Patients with Class II malocclusion treated with 2-maxillary premolars had significantly shorter treatment times when seen on biweekly appointments than those with monthly appointments; however, there was no difference in efficiency between protocols.

Using a structured light scanner to evaluate 3-dimensional soft-tissue changes after extracting 4 premolars in young adult female patients.

INTRODUCTION: Facial esthetics have always received much attention in orthodontic treatment, especially in young adult female patients. Three-dimensional (3D) soft-tissue changes after orthodontic extraction have not been fully explained. This study evaluated the 3D morphologic changes after orthodontic extraction in young female patients using a structured light scanner. METHODS: Forty-five adult female patients aged 20-25 years were enrolled in our study. The treatment group consisted of patients who received orthodontic treatment with 4 premolar extractions, and the control group was composed of young female volunteers who had not undergone any orthodontic treatment. To monitor the soft-tissue changes, 9 morphologic regions and 12 landmarks were identified for the 3D deviation analyses. The spatial deviations of landmarks and regions in the x, y, and z directions were constructed for quantitative analysis. Color map images were constructed to visualize soft-tissue displacement as a qualitative evaluation. The paired sample test was used to compare differences at the beginning of the experiment (T0) and after 24 months (T1) in both groups. An independent t test with Bonferroni correction was performed to compare differences between the treatment and control groups. A linear regression test was performed between incisor retraction and changes in the perioral tissues. RESULTS: Subtracting the effect of aging from the lip changes in the control group, the treatment group showed a statistically significant difference in the displacement of labrale superius (-1.37 mm), labrale inferius (-1.89 mm), the upper lip region (-0.98 mm), and the lower lip region (-1.36 mm) along the z-axis. No significant differences were found between the treatment and control groups in the temporal, parotideomasseteric, and buccal regions. Pearson correlation tests indicated a positive correlation between incisor tip retraction and changes in soft tissues (two-dimensional cephalometric analysis, 3D landmark measurements, and 3D regional measurements). The correlation coefficient ranged between 0.45 and 0.55. CONCLUSIONS: Three-dimensional soft-tissue changes were mainly concentrated in the upper and lower lip regions in adult female patients after the 4 premolars were extracted. For female patients aged 20-25 years with 4 extracted premolars, soft-tissue changes in the temporal, parotideomasseteric, and buccal regions were not clinically significant.

Treatment outcome comparison of Invisalign vs fixed appliance treatment in first premolar extraction patients.

INTRODUCTION: In this study, we compared the dentitional changes after Invisalign and conventional orthodontic treatment with 4 first premolar extractions. METHODS: This retrospective study included 57 patients whose orthodontic treatment involved the extraction of 4 first premolars because of bialveolar protrusion. A total of 27 patients were treated with Invisalign (mean age, 25.5 ± 5.2 years) and 30 patients with the fixed appliance (mean age, 24.4 ± 5.8 years). The angular and linear changes of the maxillary and mandibular central incisors, second premolars, first molars, and second molars were measured from the recordings on the basis of the lateral cephalograms taken before and after treatment. The angular changes of the canines and second premolars were measured using panoramic radiographs. RESULTS: The overbite and interincisal angle increased significantly in the Invisalign group compared with in the conventional fixed appliance group (P <0.05). The maxillary central incisors showed increased lingual tipping in the Invisalign group (P <0.05), whereas there was no statistically significant difference in the angular change of the mandibular incisors between groups (P >0.05). The maxillary first and second molars showed mesial tipping in the Invisalign group (P <0.05). The maxillary second premolars, first and second molars, and the mandibular second molars showed mesial movement in the Invisalign group (P <0.05). CONCLUSIONS: The Invisalign group showed more statistically significant lingual tipping of the maxillary central incisors, distal tipping of the maxillary canines, and mesial tipping of the maxillary first and second molars after maximum retraction of the anterior teeth compared with the fixed appliance group.

Influence of second premolar extractions on the volume of the oral cavity proper: a control comparative cone-beam computed tomography volumetric analysis study.

OBJECTIVES: To compare the pre- and postorthodontic treatment volumetric changes of the oral cavity proper (OCP) in extraction and nonextraction patients and to identify influencing variables. MATERIALS AND METHODS: Pre- and posttreatment cone-beam computed tomography (CBCT) scans of patients undergoing orthodontic treatment with fixed labial appliances and who satisfied the inclusion criteria were individually landmarked. Linear, angular, and volumetric measurements were determined. Descriptive statistics, repeated measure analyses of variance, correlations, and stepwise regression statistical analyses were applied. RESULTS: The CBCT scans of 54 patients who underwent the extraction of second premolars and/or extraction of second primary molars associated with agenic second premolars, and 59 nonextraction patients matched for crowding, were assessed. The mean age for both groups was 15 years. There was a statistically significant increase in the volume of the OCP for both the extraction and nonextraction groups, with the nonextraction group demonstrating a larger increase in the volume of the OCP. Gender, age, changes in mandibular and maxillary arch length, and changes in mandibular and maxillary intermolar width all influenced the change in the OCP volume. CONCLUSIONS: The volume of the OCP increased in growing patients with and without the extraction of the second premolars and/or extraction of second primary molars associated with agenic second premolars. Patients who did not have extractions as part of their orthodontic treatment demonstrated a greater overall increase in OCP volume.

Comparison of Corticotomy and Micro-osteoperforation during Canine Retraction: A Split-Mouth Design.

OBJECTIVE: Compare the efficacy of the micro-osteoperforation (MOP) and corticotomy techniques in terms of maxillary canine retraction. METHODS: Thirteen patients (5 females, 8 males; mean age, 18.07 ± 6.74 years) with healthy permanent dentition and requiring the extraction of maxillary first premolars were included in a split-mouth randomized clinical trial. Those subjects with previous orthodontic or endodontic treatment of the canines were excluded. At least 3 months post-extraction, MOPs and corticotomies were performed distal to the canines. Mini-screws with closed-coil springs (150 g) were used for the canine retraction. Dental casts were made at baseline (T0) and 3 months post-intervention (T1). Trained and calibrated examiners measured the distances from the canines to the second premolars on both sides. A signed-rank sum test was used to compare the amount of canine retraction achieved in 3 months (T0-T1) on the 2 sides. RESULTS: Retraction (mm) at the incisal level was similar in the corticotomy (3.34 ± 1.01) and MOP patients (2.74 ± 1.10) (P = 0.11); furthermore, there were no differences in the degree of medial retraction between the corticotomy (2.56 ± 0.67) and MOP (2.27 ± 0.82) (P = 0.31) procedures. No adverse events were observed. CONCLUSION: There were not any clinically or statistically significant differences in retraction between the interventions. At 3 months, a MOP is as effective as a corticotomy in accelerating the rate of tooth movement.

[The use of an individualized mini plate for the distalization of teeth]. / Ispol'zovanie individualizirovannoi miniplastiny dlya distalizatsii zubov.

The case of treatment of a 32-year-old patient with complaints about the aesthetics of a smile and the absence of teeth 17 and 46 is presented. During the examination, it was established: the retraction position of the teeth in the frontal part of the upper jaw, the closure of the molars according to the II class of the second subclass of Engl (distal bite), the vestibular position of the teeth 13, 23. To change the spatial position of the lower jaw, the fixation of the bracket system on the upper jaw was performed. and also an individualized mini-plate was installed in the area of the zygomatic alveolar ridge on the right and left, for distalization of the dentition of the upper jaw with the help of orthodontic traction applied from the teeth to the mini-plates. This clinical example demonstrates the possibility of using individualized mini-plates for distalization of the upper dentition, as an alternative and more stable method of treatment in such clinical cases.

Demineralized dentin matrix promotes gingival healing in alveolar ridge preservation of premolars extracted for orthodontic reason: a split-mouth study.

Objective: The purpose of this study was to prospectively evaluate the efficacy of a demineralized dentin matrix (DDM) in decreasing the initial inflammatory response of the gingiva and facilitating the repair and regeneration of soft tissue in alveolar ridge preservation. Methods: This clinical study employed a split-mouth design. Fourteen patients with a total of forty-four sites underwent extraction and alveolar ridge preservation (ARP) procedures. A Bilaterally symmetrical extraction operation were conducted on the premolars of each patient. The experimental group received DDM as a graft material for ARP, while the control group underwent natural healing. Within the first month postoperatively, the pain condition, color, and swelling status of the extraction sites were initially assessed at different time points Subsequently, measurements were taken for buccal gingival margin height, buccal-lingual width, extraction socket contour, and the extraction socket area and healing rate were digitally measured. Additionally, Alcian Blue staining was used for histological evaluation of the content during alveolar socket healing. Results: Both groups experienced uneventful healing, with no adverse reactions observed at any of the extraction sites. The differences in VAS pain scores between the two groups postoperatively were not statistically significant. In the early stage of gingival tissue healing (3 days postoperatively), there were statistically significant differences in gingival condition and buccal gingival margin height between the two groups. In the later stage of gingival tissue healing (7, 14, and 30 days postoperatively), there were statistically significant differences in buccal-lingual width, extraction socket healing area, and healing rate between the two groups. Furthermore, the histological results from Alcian Blue staining suggested that the experimental group may play a significant role in promoting gingival tissue healing, possibly by regulating inflammatory responses when compared to the control group. Conclusion: The application of DDM in alveolar ridge preservation has been found to diminish initial gingival inflammation after tooth extraction. Additionally, it has shown the ability to accelerate early gingival soft tissue healing and preserve its anatomical contour. Clinical trial registration: chictr.org.cn, identifier ChiCTR2100050650.

EVALUATION OF THE EFFECT OF DIFFERENT INTRAORIFICE BARRIER MATERIALS ON CORONAL MICRO LEAKAGE OF ENDODONTIC ALLY TREATED TEETH BY USING MICRO-COMPUTED TOMOGRAPHY TECHNOLOGY (A COMPARATIVE IN VITRO STUDY).

Endodontic failure can result from insufficient coronal seal, which induces post-endodontic infections. Therefore, the intra-orifice barrier is a reliable substitute technique to reduce coronal leakage in teeth where endodontic therapy has been performed. Aim - to evaluate the effect of three different restorative materials (Ever X Flow, Centeno forte, and Bio-C sealer ION) as intraorifice barriers (IB) of endodontic ally-treated teeth on Coronal microleakage represented by Internal adaptation of barrier materials to radicular dentin and Porosity of materials. Forty-sound removed human mandibular premolars were chosen, and decorated to a standardized root length (15 ± 0.5mm), a digital caliper was used to measure the mesiodistal and buccolingual diameters of the coronal plane of root to roughly similar buccolingual (BL) and mesiodistal (MD) dimensions (7.5 ± 0.5mm and 4.5 ± 0.5 mm respectively) and the coronal plane of the root canal be approximately similar in buccolingual (BL) and mesiodistal (MD) dimension (3.2 ± 0.2 and 1.8 ± 0.2 mm respectively). The roots were prepared and obdurate with gutta-percha and AH Plus sealer, then divided into one control group to three equal groups according to the type of intraorifice materials (n=10). Except for the control group, the coronal 3-mm of gutta-percha was removed and filled with Ever X Flow, Cention forte, and Bio-C sealer ION. After this, all groups underwent thermo-cycling ageing (1000 cycles, water temperature (5-55oC), dwell time 30s, and transfer (draining) time 10s between cycles). With micro-computed tomography (µCT), three-dimensional gap volumes at the barrier-dentin contact and the porosity of the barrier materials were investigated. The results showed a significant difference between the control and three types of barrier materials at (P 0.05); Ever X Flow demonstrated lower values of the internal gap of barrier materials to radicular dentin and porosity while the control demonstrated higher values of the internal gap to radicular dentin; however, there was no significant difference between the control and Bio-C sealer ION. When compared to teeth treated with endodontics but without intraorifice barriers (IOB), those with IOB have less coronal microleakage.

Treatment effectiveness of young adults using clear aligners versus buccal fixed appliances in class I malocclusion with first premolar extraction using the ABO-Objective Grading System: A randomized controlled clinical trial.

OBJECTIVE: To compare the effectiveness of the clear aligners with the traditional fixed appliances in the treatment of premolars extraction complex cases using the American Board of Orthodontics Objective Grading System (ABO-OGS). MATERIAL AND METHODS: A single-centre, 2-parallel groups RCT with two arms. Forty severe crowding patients (14 males, 26 females; mean age: 21.40±2.42) who required four first premolars extraction were included and randomly allocated into two treatment groups: clear aligners therapy group (CAT), and fixed appliances therapy group (FAT). Cases complexities were measured on pre-treatment records using the Discrepancy index (DI). Post-treatment records were evaluated using the American Board of Orthodontics Objective Grading System (ABO-OGS). Two sample t-tests and Fisher's Exact tests were used to test for significant differences between the two groups. The statistical significance was set at P < 0.006 using Bonferroni's correction. RESULTS: For the DI, the mean scores were 32.25 (± 4.33) in the CAT group and 33 (± 7.92) in the FAT group. In the CAT group, the total OGS score ranged between 6-33 points with an average of 17.50(± 7.41), whereas the total score in the FAT group went between 4-30 points with an average of 12.89 (± 6.31) with no significant differences between the two groups (P=0.05). When comparison of the successful cases between the two groups was made, 11 cases received passing scores, and 9 cases received failing scores in the CAT group. Whereas in the FAT group, 17 cases received passing scores, and 3 received a failing score. No statistically significant differences were found in the passing rates between of the CAT and FAT groups (P = 0.421). CONCLUSIONS: According to the ABO-OGS total scores, there was no significant difference between the clear aligners and fixed appliances in the treatment of class I severe crowding cases with first premolars extraction in young adults. There were no differences between the two techniques in the OGS components scores except for the occlusal contacts, which were significantly better with the fixed appliances. When comparing the number of successful and failed cases between the two groups, no significant differences were noted, with the fixed appliances having a 30% higher success rate than the clear aligners, which must be considered clinically when choosing between these two techniques in the complex orthodontic cases treatment.

The effect of space arrangement between anterior teeth on their retraction with clear aligners in first premolar extraction treatment: a finite element study.

INTRODUCTION: Clear aligner therapy has become increasingly popular in recent years, although it has encountered several difficulties in premolar extraction treatment. These difficulties include anterior dentition, lingual tipping and extrusion. The design of the present clinical scheme usually set a tiny space between the anterior teeth before retraction in order to obtain an ideal outcome. The objective of our research was to analyze the effect of the existing spaces during retraction. METHODS: Models including maxillary dentition without first premolars, maxilla, periodontal ligaments, gingiva, or aligners were constructed and imported to an ANSYS workbench. Five groups of models were created: without spaces and with 0.25, 0.50, 0.75 and 1.00 mm spaces between the anterior dentition. A 0.20 mm retraction step was applied to all the groups. RESULTS: As the spaces between the anterior dentition increased, the bowing effect of the aligner caused by the passive forces decreased gradually. Accordingly, the degree of extrusion of the anterior dentition was alleviated significantly, while sagittal movement was reduced. However, the overall movement tended to be a bodily displacement rather than tipping. Meanwhile, maximum Von Mises stress of the periodontal ligaments (PDLs) was markedly decreased. CONCLUSION: These analyses indicate that spaces between the anterior dentition during anterior retraction are beneficial for decreasing the tendency for extrusion of the anterior dentition and require provision of anchorage. Appropriate spaces can be designed to lest the lingual tipping and extrusion effect of the anterior teeth while simultaneously reducing the maximum stresses on PDLs.

Clinical and histologic evaluation of heterotopic mucosa transpositioning at teeth and dental implants.

AIM: To investigate the healing after heterotopic mucosa transpositioning at dental implants and teeth. MATERIALS AND METHODS: One hemimandible per dog (n = 4) was allocated to receive 3 implants (test), whereby 3 premolars on the contralateral side served as controls. After osseointegration, a Z-plasty was performed on the buccal aspect of the test and control sites to heterotopically move the zone of keratinized tissue (KT) into a region with non-keratinized tissue (nKT) and vice versa. Clinical measurements were performed before (T0) and at 12 weeks following heterotopic transposition (T1). Thereafter, specimens were processed for histological analysis. RESULTS: Clinical measurements revealed that at T1, a band of KT was reestablished at teeth (mean: 2.944 ± 1.866 mm), whereas at implants, the transpositioned nKT resulted in a mucosa without any signs of keratinization (mean: 0 mm; p < .0001). At implant sites, the probing attachment level loss was more pronounced compared to tooth sites (-1.667 ± 1.195 mm and -1.028 ± 0.878 mm, respectively; p = .0076). Histologically, the transpositioned nKT, was accompanied by the formation of KT at the tooth but not at implant sites. The supracrestal soft tissues were statistically significantly higher at tooth compared to implant sites (2.978 ± 0.483 mm and 2.497 ± 0.455 mm, p = .0083). The transpositioned KT remained mostly unaltered in its morphological characteristics. CONCLUSIONS: The findings of this study indicate that: (a) transpositioned KT may retain its morphological characteristics; and (b) transpositioned nKM was accompanied by the formation of KT at the tooth but not at implant sites.

Success rate of infrazygomatic crest mini-implants used for en-masse retraction of maxillary anterior teeth in first premolar extraction cases: A three-dimensional comparative prospective clinical trial between adolescents and young adults.

BACKGROUND: The purpose of this study was to compare the success rate of infrazygomatic mini-implants between adolescents and young adults. METHODS: A total of 60 subjects of different age groups ie, (group I [adolescents]: 12-18 years, mean age: 14.9 ± 2.9 years; group II [young adults]: 19-25 years, mean age = 21.9 ± 3.1 years) were assessed in the study. En-masse retraction of maxillary anterior teeth was carried out with extraction of upper first premolars with infrazygomatic crest (IZC) mini-implants as anchorage units. Clinical parameters such as success rate, soft tissue thickness, maximum insertion torque, maximum removal torque, pain response, soft tissue response, and cone-beam computed tomography parameters such as embedded angulation, penetration depth, thickness of bone on buccal and palatal aspect of mini-implant, and peri-implant bone density were evaluated. RESULTS: The success rate of IZC mini-implants in adolescents was found to be 96.6% and 98.3% in young adults respectively. There was no significant difference in success rate between the two groups. Intergroup comparison showed a significant difference (P < 0.05) in terms of maximum insertion torque, maximum removal torque, soft tissue thickness, cortical bone thickness, and peri-implant bone density values. Comparison between right and left side revealed a significant difference (P < 0.05) with regards to soft tissue response, soft tissue thickness, total bone thickness, cortical bone thickness, and peri-implant bone density. CONCLUSIONS: There was no significant difference in the success rate of IZC mini-implants between adolescents and young adults. Thus, the use of IZC mini-implants can be recommended in adolescents for successful orthodontic treatment.

Profile changes in extraction treatments of upper premolars: A case series.

This case series describes the soft tissue changes following extraction treatment in two patients with diverse lip thickness, but with similar baseline parameters including: labial competence, soft tissue profile, patient's age, extraction protocol, methods of anchorage, malocclusion, crowding, treatment appliance and mechanics. The same treatment plan involved upper first premolar extractions and lingual appliance combined with skeletal anchorage. The lip thickness played a crucial role in these cases, since a similar change of the incisor position leads to a different profile variation. This difference could be explained by the differing initial lip thicknesses as the patient with thin lips showed a more pronounced profilometric change. The choice of the ideal treatment plan must be tailored to the individual patient, taking into account not only initial skeletal and dental factors but also soft tissue factors, as well as the treatment goals.